0:00textured surface water droplets A dynamic close-up shot captures a dark, granular, textured surface, possibly metal or composite, heavily speckled with reflective water droplets. The lighting is dramatic, with sharp highlights catching the edges of the droplets and the texture, suggesting a high-contrast environment. The background is almost entirely black, with only subtle, out-of-focus light sources appearing as faint, shimmering bokeh in the distance. The camera quickly moves and changes angle, creating a sense of rapid transition or impact, as if something is about to happen or has just occurred. The overall color palette is dark, with silver and white highlights from the water and reflections, hinting at a sleek, industrial aesthetic.
0:01dark grid water droplets A very tight close-up focuses on a dark, grid-like pattern, possibly the top surface of an electronic device or an internal component, with small, rectangular indentations. Like the previous shot, it's covered in minute water droplets that shimmer under focused, cool lighting, creating high contrast against the deep black of the material. The background is completely obscured in shadow. The shot is brief and quickly transitions, maintaining a dark and mysterious tone. The reflections from the droplets suggest a metallic or semi-glossy finish. The composition is highly geometric due to the grid, adding a sense of precision to the visual.
0:02printer orange panel reveal The scene begins in darkness, slowly revealing a vibrant, matte orange side panel of a 3D printer. The panel has a vertical orientation, standing out sharply against the deep black background. The camera quickly pans across the panel, highlighting its clean lines and minimalist design. The lighting is focused, casting a soft glow on the orange surface while keeping the rest of the frame in shadow, emphasizing the sleekness of the product. No text or graphics are immediately visible on the panel, allowing its color and form to be the primary focus. The transition is swift, maintaining the rapid pace of the opening montage.
0:03prusa logo vertical text A dark, vertical surface is revealed, likely a side panel of the 3D printer. The text 'CORE ONE L' is displayed vertically, with 'CORE' in white and 'ONE L' in a bright orange, positioned on a black background, creating a bold and clear brand statement. The typography is modern and sans-serif. The camera focuses sharply on the text, with the rest of the printer's details remaining in deep shadow or out of focus, maintaining a sense of anticipation. This close-up highlights the branding and reinforces the product's identity. The stark contrast between the bright text and dark background contributes to a professional, high-tech aesthetic.
0:04prusa core one l logo pan The scene shows a close-up of a light gray metallic surface, part of the 3D printer's internal or external structure, featuring the 'CORE ONE L' logo. The 'CORE' part of the logo is in an orange-to-white gradient, while 'ONE L' is in white, set against a dark grey rectangular background which is affixed to the larger light gray panel. The camera smoothly pans upward across this surface, revealing more of the light gray material. The lighting is soft and even, highlighting the metallic sheen and precise manufacturing. The overall tone is clean and sophisticated, focusing on the quality and branding of the product.
0:06prusa qr code close up An extreme close-up shot focuses on a white surface, possibly a metal plate, showcasing the word 'PRUSA' in bold, black capital letters. Below the text, there is a clear, detailed QR code, also in black. The surface itself has a subtle, almost imperceptible texture. The lighting is bright and direct, creating a crisp, clean aesthetic. The camera gently pushes in, bringing the details of the text and QR code into sharp focus, implying precision and technical sophistication. The background is a soft, out-of-focus blur of white and light gray, further isolating the central branding elements.
0:07printer rocket engine model A medium wide shot showcases the interior of a black 3D printer, which has an open top and a visible orange side panel on the left. Inside, a large, intricately detailed orange rocket engine model stands upright on the print bed. The print head, bearing the 'PRUSA ONE L' logo, moves deliberately across the top, illustrating the 3D printing process. Bright LED strips illuminate the print bed and the interior, casting a stark, technical light on the model and the machine's components. The background is dark and out of focus, emphasizing the printer and the model. The overall impression is one of advanced manufacturing and precision engineering.
0:12josef prusa intro A medium close-up shot features a man, identified as Josef Prusa, speaking directly to the camera against a plain, deep black background. He is illuminated by soft, frontal lighting that highlights his face and upper body, creating a professional and engaging presence. He wears a black blazer over a black t-shirt, giving a sleek and modern appearance. His facial expression is welcoming and confident, and he gestures with both hands to emphasize his words. The shot is steady and focused on the speaker, ensuring clear communication. The color palette is minimalist, dominated by black and the natural skin tones of the speaker.
0:14printer in workshop setting A wide shot displays the 3D printer, a black unit with a prominent orange vertical stripe, positioned on a light wooden workbench in a well-organized workshop. The background features various tools and shelving units, including red clamps hanging on a rack and wooden hand planes on shelves, suggesting a creative and industrious environment. The lighting is bright and ambient, illuminating the entire workshop space naturally. The camera remains static, providing a clear and stable view of the printer within its functional context. The color palette is warm and inviting, combining the natural wood tones with the industrial black and orange of the printer.
0:17josef prusa explains features A medium close-up of Josef Prusa, speaking directly to the camera against a plain black background. He maintains a friendly and confident facial expression, engaging the audience with his words. He continues to wear a black t-shirt under a black blazer. His hand gestures are animated, conveying enthusiasm and clarity as he explains the features of the 3D printer. Soft, frontal lighting illuminates his face and upper body, creating a focused and professional presentation. The minimalist background ensures that the viewer's attention remains on the speaker and his message, reinforcing his authority on the product.
0:19printer head close up A tight close-up shot focuses on the print head of the 3D printer, which is dark gray or black with metallic accents. The 'PRUSA CORE ONE L' logo is prominently displayed in white and orange on the side of the print head, with 'PRUSA' in white, 'CORE' in orange, and 'ONE L' in white. A small, circular cooling fan is visible below the logo. The camera is slightly angled, showing the print head in motion, indicating active printing. The lighting is subtle but highlights the textures and components of the print head. The background is a dark, out-of-focus blur of the printer's interior, keeping the focus entirely on this critical part of the machine.
0:21josef prusa product benefits A medium close-up shot features Josef Prusa again, speaking directly to the camera against a plain black background. He is well-lit by soft, frontal light, making his face and upper body clearly visible. His expression is enthusiastic and confident, as he uses open hand gestures to articulate the benefits and applications of the 3D printer. He is dressed in a black t-shirt under a black blazer. The shot remains static, providing a stable platform for his presentation. The overall aesthetic is professional and clean, with the dark background serving to keep the audience's attention entirely on the speaker and his message.
0:26printer interior active printing A medium shot shows the front of the black 3D printer with its clear, transparent door. The interior is brightly illuminated by internal LED lights, showcasing the print head moving precisely over the print bed. No object is visibly being printed at this exact moment, but the motion implies active operation. The 'PRUSA CORE ONE L' branding is visible on the machine's side. The background is a blurred workshop environment, similar to previous shots, providing context without distracting from the main subject. The shot is stable, offering a clear view of the machine's active state.
0:29josef prusa talks durability A medium close-up of Josef Prusa, speaking directly to the camera against a plain black background. His facial expression is serious and focused, conveying the importance of the features he is describing. He uses deliberate hand gestures to emphasize points related to the printer's capabilities and material compatibility. He is dressed in a black t-shirt and black blazer, maintaining a consistent professional appearance. The lighting is soft and frontal, ensuring clarity and focus on the speaker. The static camera allows for a direct and uninterrupted presentation of the product's advantages.
0:33prusa 3d printed object close up A tight close-up shot focuses on a circular, light brown 3D printed object with a ribbed, wavy design. The word 'PRUSA' is debossed into the flat, circular base of the object, clearly visible. A pair of hands, with light skin tone and short nails, gently holds and rotates the object, showcasing its intricate texture and the branded base. The lighting is soft and even, highlighting the fine details of the print. The background is blurred, keeping the emphasis on the object itself. The shot conveys the quality and detail achievable with the 3D printer.
0:34think big print big graphic A striking full-screen graphic features a vibrant orange background with abstract, polygonal shapes. On the left side, the bold white text 'Think Big. Print Big.' is prominently displayed, followed by the 'PRUSA CORE ONE L' logo with 'PRUSA' in white and 'CORE ONE L' in a white box with an orange outline. On the right, the black 3D printer, containing the orange rocket engine model, is showcased. The printer's internal lights are on, illuminating the model. The graphic is clean, modern, and high-contrast, visually reinforcing the product's capabilities and brand messaging. The bright orange background is an on-brand color, creating a strong visual identity.
0:37prusa logo light scan The scene is initially dark, gradually revealing the 'PRUSA CORE ONE L' logo on the print head. A horizontal strip of light scans from left to right across the logo, illuminating it sequentially. The logo appears on a dark gray or black background, with 'PRUSA' in white, 'CORE' in red, and 'ONE L' in white within a black rectangular box. The text is sharp and clear. The slow, deliberate movement of the light creates a dramatic and sophisticated unveiling effect, drawing attention to the brand name. The overall mood is high-tech and precise, with minimal visual clutter.
0:38printer head logo detail A detailed close-up of the 3D printer's print head. The 'PRUSA CORE ONE L' logo is prominently displayed, with 'PRUSA' in white, 'CORE' in red, and 'ONE L' in white within a black box. The print head itself is black or very dark gray, with visible screws and a small circular fan component with its fan blades stationary. The lighting is direct and focused, highlighting the mechanical details and the crispness of the branding. The background is a shallow depth of field, blurring into darkness, ensuring the print head is the sole focus. The scene conveys precision engineering and brand identity.
0:39printer interior full view rocket A direct, full-frontal view of the PRUSA CORE ONE L 3D printer's interior. The black enclosure features a transparent door, revealing the print bed and the already printed vibrant orange rocket engine model standing centrally. A blue LED strip below the print bed provides illumination. The print head is positioned at the top, visible with its 'PRUSA ONE L' logo. The 'PRUSA' logo is also visible vertically on the left side of the printer's frame. The control panel with illuminated buttons is at the bottom, hinting at user interaction. The overall composition emphasizes the printer's capacity and the quality of its output.
0:40rocket engine model with ui A close-up shot focuses on the base of the orange rocket engine model inside the 3D printer. The model features intricate details and the 'PRUSA 3D' text debossed on its surface. Below the print bed, the printer's control panel is visible, displaying a graphical user interface (GUI) with various icons and text, indicating settings like 'Print', 'Preheat', 'Filament', and 'Info'. A hand reaches into the frame to gently lift the printed model from the print bed, demonstrating ease of removal. The lighting is internal and functional, clearly illuminating the model and the UI. The shot highlights both the product's output quality and user-friendly interface.
0:43rocket engine model mk4s text A close-up of the detailed orange rocket engine model is presented against a pure black background. The model rotates slowly, showcasing its complex structure, including multiple nozzles and connected tubing. The text 'MK4S' appears in bold white letters, overlaying the lower part of the rotating model. The lighting is even and soft, highlighting the matte finish of the orange material and the intricate design without harsh shadows. The rotation provides a dynamic view of the printed object, emphasizing its three-dimensional quality and the precision of the print. The black background ensures the model and text are the sole focus.
0:45rocket engine model core one text The orange rocket engine model continues to rotate against a black background, maintaining its detailed presentation. This time, the text 'CORE One' appears in bold white letters, positioned below the rotating model. The lighting remains soft and even, highlighting the contours and connections of the rocket engine. The rotation allows for a comprehensive view of the model's design, from its multiple components to its overall form. The pure black backdrop provides a stark contrast, making the orange model and the white text stand out vividly, emphasizing the product line. The scene is clean, professional, and visually engaging.
0:47rocket engine detail zoom A close-up shot of the orange rocket engine model, still rotating against a black background. The camera slowly zooms in, revealing even finer details of the model's intricate pipes, valves, and textured surfaces. The debossed 'PRUSA 3D' logo is clearly visible on one of the main body sections. The matte orange color remains consistent, and the lighting continues to be soft and even, accentuating the three-dimensional form and precision. The gradual zoom emphasizes the high fidelity of the 3D print, showcasing the printer's ability to create highly complex and detailed objects. The background is a solid black, ensuring maximum focus on the model.
0:51printer and car headlight A wide shot shows the 3D printer on a wooden workbench in a workshop environment. The printer has its signature black and orange design. In the foreground, slightly out of focus, a person's hands are holding a red car headlight assembly, which is made of a black housing with a clear, reflective headlight lens. The workshop background is bright and filled with various tools and equipment, suggesting a practical and creative space. The lighting is natural and diffuse, creating a warm, inviting atmosphere. The shot frames the printer as a central tool within a larger making or engineering context, hinting at its use for functional parts.
0:54car headlight close up A close-up shot focuses intently on a black car headlight assembly with a vibrant red border. The clear, circular headlight lens is prominent in the center, reflecting soft light. The plastic housing of the headlight is matte black, providing a subtle texture. In the background, the 3D printer is visible but blurred, suggesting its role in creating such components. The lighting is soft and natural, emphasizing the product's finish and detail. The shot highlights the precision and aesthetic quality of parts that can be produced by the printer, connecting it to real-world applications.
0:55removing printed part from printer A medium shot of the 3D printer, with a person's hand opening the transparent front door. The hand then carefully reaches into the illuminated interior and removes a large, dark gray, intricately designed 3D printed object from the print bed. The object resembles a complex, tree-like lattice structure. White lines and circles overlay the screen, dynamically pointing to the printer and the object as the voiceover explains features. The printer has its signature black and orange design. The lighting is internal and bright, clearly showcasing the process. The workshop background is blurred, keeping the focus on the interaction with the printer and the print.
0:59flexible printed part manipulation A close-up shot focuses on a pair of hands manipulating the previously seen dark gray, tree-like 3D printed object. The object is demonstrated to be highly flexible, as the hands bend and twist it, showcasing its material properties and structural integrity. The texture of the printed material is visible, suggesting a durable and versatile filament. The lighting is soft and even, highlighting the details of the object and the hands. The background is a blurred workshop environment, keeping the focus tightly on the demonstration of the printed part's characteristics, implying advanced material capabilities.
1:02car parts showcased A close-up shot features two car components. On the right, the black car headlight assembly with the red border is prominently displayed. On the left, a new, dark gray 3D printed car component, possibly a cover or frame, is brought into the frame and positioned next to the headlight. This new component is also intricately shaped, highlighting the printer's ability to produce functional and aesthetically matching parts. The background shows the blurred workshop, and the 3D printer is visible in the background, subtly indicating its role in the production. The lighting is natural and emphasizes the textures and finishes of the parts.
1:06printer exploded view assembly An isometric shot presents the full 3D printer from a slightly elevated angle. Initially, the printer appears as a complete, enclosed black unit with an orange side panel and a clear top. Then, in a dynamic animation, the various panels and components of the printer explode outwards, revealing its internal structure and individual parts. The camera smoothly zooms out slightly and rotates, maintaining a clear view of the deconstructed machine. The background is pure black, emphasizing the components. The aesthetic is highly technical, showcasing the robust engineering and modular design of the printer's exoskeleton.
1:09printer internal components breakdown An animated exploded view continues against a black background, specifically highlighting the core internal components of the 3D printer. The scene isolates the print head assembly, the gantry system (X-Y axis), the print bed with its support rods, and the base frame. Each part floats in space, precisely aligned, emphasizing the modular and sturdy design. The metallic and dark gray components are clearly visible. The lighting is even and bright, accentuating the details of each part. This technical breakdown illustrates the robust and rugged construction, providing insight into the printer's engineering, with a focus on its stability and mechanics.
1:12prusa heatbed qr code An extreme close-up shot focuses on the white metallic surface of the printer's heatbed. The word 'PRUSA' in bold, black capital letters is prominent, alongside a detailed QR code. Subtle warning symbols are also visible in the background, slightly out of focus. The camera slowly pushes in, bringing the text and QR code into sharp focus, showcasing the precision and branding. The lighting is bright and direct, highlighting the clean, industrial aesthetic of the heatbed. The minimalist color palette of white, black, and gray contributes to a sense of technical sophistication and attention to detail in the product's design.
1:16installing heatbed into printer A close-up shot from an overhead perspective shows a hand carefully inserting a flat, rectangular metal plate, which is the heatbed, into the interior of the 3D printer. The heatbed has the 'PRUSA' branding and a QR code visible on its surface. The interior of the printer is dark, with visible black components and screw holes where the heatbed is being seated. The lighting is focused on the heatbed and the hand, creating a clear view of the installation process. The action emphasizes the modularity and user-friendly assembly of the printer, suggesting easy maintenance or upgradeability. The color palette is muted, focusing on the dark tones of the printer and the metallic sheen of the heatbed.
1:18heatbed fans underneath A close-up shot from below the print bed reveals two small, circular fans mounted underneath a dark gray panel. The fan blades are white or very light gray, contrasted against the black fan housing. They are visibly rotating, creating a gentle blur, indicating active air circulation. Small white screw heads are also visible, securing the fans. The lighting is focused, illuminating the fans and the underside of the print bed with a cool, functional glow. The background is dark and indistinct. This shot highlights a key internal mechanism, the convection heat distribution system, emphasizing the printer's advanced cooling and heating capabilities.
1:21printer internal wiring fans An upward-angled close-up shot shows the interior of the 3D printer's top section. It reveals complex wiring, including multicolored bundled wires, and a series of white LED strips running along the upper frame. Two small black fans are visible at the top, suggesting active ventilation. The 'PRUSA CORE ONE L' branding is subtly visible on an internal component. The lighting is bright from the LED strips, illuminating the intricate details of the internal construction. The background is the dark interior of the printer, creating a sense of depth and technical complexity. This shot highlights the sophisticated internal engineering and functional design elements.
1:27printer workshop side view A medium wide shot from the side shows the black 3D printer with its orange accent panel, situated on a light wooden workbench in a workshop. The side view clearly displays the external spool holder, holding a roll of black filament, indicating its readiness for printing. The background is a bright workshop environment with tools and various objects, suggesting an active workspace. The lighting is ambient and natural, creating a functional and practical atmosphere. The camera remains static, providing a clear and stable view of the printer within its operational context, emphasizing its integration into a working environment.
1:29thermal image heatbed full A top-down shot presents a thermal imaging view of the 3D printer's heated bed. The image displays a vibrant yellow and orange color palette across the entire surface, transitioning into purple and blue at the very edges, indicating even and consistent heat distribution. The heated area is almost perfectly rectangular, covering the majority of the print bed. The text 'CORE One L' overlays the bottom right corner of the thermal image, linking the visual information to the product. The strong, contrasting colors of the thermal image dramatically illustrate the efficiency and lack of cold spots in the heating system.
1:33thermal image heatbed zoomed A close-up thermal imaging shot of the 3D printer's heated bed, highlighting the superior and even heat distribution. The surface glows predominantly in bright yellow and orange, indicating high and uniform temperature, with only minimal purple and blue tones appearing at the extreme edges. The rectangular shape of the heated area is clearly defined. The text 'CORE One L' is again overlaid in the lower right corner. The camera remains static, allowing the viewer to absorb the detailed thermal data. This visual evidence strongly reinforces the claim of efficient and consistent heating, addressing common problems in large-format printing.
1:36thermal image heating up The scene displays a dynamic thermal imaging sequence of the 3D printer's heatbed as it rapidly warms up. The colors quickly transition from cooler purples and blues to warmer yellows and oranges, demonstrating a fast and efficient heating process. The rectangular area of the heatbed steadily fills with the hotter colors. The camera maintains a stable, top-down view. This quick visual transformation effectively illustrates the speed and power of the new heatbed technology. The emphasis is on the thermal performance, showcasing a key advantage over conventional heating systems.
1:39printer printing yellow object An overhead shot provides a clear view into the interior of the 3D printer, looking down onto the print bed. A complex, wavy, and textured yellow object is being actively printed, with the print head moving across the surface, depositing filament. The interior is brightly illuminated by LED lights, enhancing visibility of the printing process. The black background of the printer's frame contrasts with the vivid yellow of the printed object. The camera remains static, allowing for a steady observation of the intricate layer-by-layer printing. This shot demonstrates the printer's operational speed and capacity for creating large, visually engaging models.
1:41prusa heatbed led strip A close-up shot focuses on the edge of the print bed, specifically highlighting a vibrant green LED strip running along its front. The words 'PRUSA CORE ONE L' are visible on the metallic edge of the heatbed. The camera slowly pans from right to left, following the glowing green light and emphasizing the branding. The background is a dark, out-of-focus interior of the printer, which makes the illuminated edge stand out even more. This detail highlights both the aesthetic and functional aspects of the printer, suggesting advanced features and a modern design. The green color might indicate a status or simply be part of the brand's visual identity.
1:46split screen wiring and airflow A split-screen shot vertically divides the frame. The top half shows a close-up of intricate, bright orange wires crisscrossing within the dark interior of the 3D printer, with a glimpse of the printer's internal structure. The bottom half is a close-up of a light blue electrical connector, where a bundle of glowing pink and blue wires appears to be 'flowing' into it, representing data or power transfer. As the shot progresses, the connector moves downwards, and a blue air deflector appears above it, illustrating the dynamic internal processes. The lighting is dramatic, with the glowing wires and the blue components standing out against the dark background, conveying a sense of energy and precise engineering.
1:49split screen air deflectors A continuation of the split-screen sequence. The top half shows the upper part of the printer's interior, with fans and internal structure visible. The bottom half focuses on a light blue air deflector, which then separates into two parts, revealing another similar deflector below it. The deflectors are designed to redirect airflow. This action is synchronized with a voiceover explaining the air distribution system. The lighting is technical and clear, highlighting the precise movement of the components. The dark background ensures focus on the mechanical action, explaining how the printer manages its internal environment for optimal printing.
1:52printer interior hot air flow A wide, front-on shot shows the interior of the 3D printer. The inside is almost entirely dark, except for a subtle reddish-purple glow emanating from the central area, hinting at circulating hot air. The print head is visible at the top. This minimalist visual effectively conveys the concept of an enclosed, temperature-controlled printing environment. The camera is static, allowing the focus to be on the atmospheric effect and the internal conditions. The overall mood is high-tech and somewhat mysterious, emphasizing the advanced thermal management system of the printer.
1:54chamber temperature display A wide, front-on shot of the 3D printer's interior, similar to the previous scene, but with large, bold white numbers digitally overlaid in the center of the frame. The numbers dynamically change, displaying increasing temperatures (28, 40, 52, 59, 60 degrees Celsius), accompanied by the '°C' symbol. The interior maintains a subtle reddish-purple glow. The camera is static. This combination of visual and textual information clearly demonstrates the rapid and precise temperature control within the printer's chamber, showcasing a critical performance metric for advanced material printing. The digital overlay emphasizes the technical capabilities.
1:58printer interior ventilation An overhead close-up shot peers into the interior of the 3D printer, focusing on the ventilation system. The print head is visible in the foreground, with various cables and tubes connected to it. In the background, two fans are visible, and below them, a grid-like structure, likely a vent. The internal LED lights provide a cool, clear illumination. The camera is static, offering a stable view of the mechanical components designed for airflow. The dark and metallic tones of the printer's components dominate the color palette, highlighting the industrial design and functional engineering.
2:00extruders moving close up An extreme close-up shot of a small, dark gray or black component with fine, detailed textures, possibly part of the extruder or a moving mechanism within the printer. The component rotates and shifts slightly, demonstrating its precise movement. The background is a dark, blurry field of grid-like patterns, creating a sense of depth and technical intricacy. The lighting is focused and cool, accentuating the material's texture and the component's sharp edges. The shot is brief and fast, showcasing the minute, yet critical, mechanical actions happening within the printer, highlighting its fine-tuned operation.
2:02printer in modern setting A wide shot positions the 3D printer in a stylish, modern interior setting. The printer, with its black body and prominent orange vertical stripe, rests on a black console against a textured dark gray and white geometric wall. To the left, minimalist white decorative objects and a cream-colored armchair add to the contemporary aesthetic. The internal LED lights of the printer are on, illuminating a light gray, wavy 3D printed object inside. The lighting is soft and ambient, creating an elegant and functional atmosphere. The composition integrates the printer as a sophisticated piece of technology fitting into a well-designed space.
2:04wavy printed object close up A close-up shot focuses on the intricate, wavy surface of the light gray 3D printed object seen in the previous scene. The camera moves slowly along the curves, highlighting the smooth transitions and the fine layered texture of the print. The lighting is soft and directional, creating subtle shadows that enhance the three-dimensional form and texture. The color palette is dominated by muted grays and whites, conveying a clean and modern aesthetic. The shot emphasizes the high resolution and aesthetic quality of the prints achievable with the PRUSA CORE ONE L, suggesting its suitability for artistic or detailed functional models.
2:06top vent mechanism close up An extreme close-up shot focuses on a black louver-like mechanism, possibly a vent or cover, located at the top interior of the 3D printer. A small, black, rectangular component moves precisely, opening or closing the vent. The background is a blurry field of parallel dark lines, suggesting a functional grid structure. The lighting is cool and direct, highlighting the mechanical action and the texture of the plastic. The shot emphasizes the printer's automated features, specifically the intelligent management of its internal environment. The scene is brief and focuses on the precision of the moving part.
2:09hand opening top vent A medium shot shows the side of the 3D printer, which is black with a vertical orange accent. The printer is placed in a modern indoor setting, similar to previous shots. A hand reaches in and manually slides open a top vent on the printer's enclosure. The action is smooth and deliberate, showcasing a user-interactive feature. The interior of the printer is illuminated, and a portion of the light gray wavy printed object is visible. The lighting is soft and ambient, providing a clear view of the interaction. This scene highlights the printer's adaptability to different printing materials through manual control of the chamber environment.
2:11hand closing top vent A medium shot captures the side of the 3D printer, identical to the previous scene. A hand reaches in and manually slides closed the top vent on the printer's enclosure. The movement is fluid and precise, demonstrating the ease of adjusting the printer's settings. The printer's internal lights remain on, subtly illuminating the interior where the light gray wavy printed object is still visible. The ambient lighting of the modern setting is soft and consistent. This scene directly follows the opening of the vent, completing the demonstration of manual control over the print chamber's environment, suitable for different filament types.
2:13packaging prusa core one l A close-up shot focuses on the top of a brown cardboard box. The box features the prominent 'PRUSA CORE ONE L' logo, with 'PRUSA' and 'ONE L' in black, and 'CORE' in a white box with a black outline. Below the main logo, the text '3D printer by Josef Prusa' is printed in a smaller, elegant black font. The cardboard material has a natural, slightly textured appearance. The lighting is soft and even, highlighting the clean, minimalist design of the packaging. The shot emphasizes the brand and the product name clearly, establishing the unboxing experience from the start.
2:15unboxing printer with cutter A close-up shot captures a person's hands using a blue box cutter to carefully cut through the sealed tape on a brown cardboard box. The box has various shipping labels and graphics, including a stylized umbrella and paw print, alongside repetitive security tape. The lighting is bright and focused on the hands and the box. The hands have light skin tone and a ring on one finger. The shot emphasizes the careful and anticipation-filled process of unboxing a new product, suggesting a premium experience. The background is slightly blurred, maintaining focus on the action of opening the package.
2:18printer revealed in box An upward-angled shot peers inside the newly opened cardboard box, revealing the top and side of the black 3D printer. The printer's black casing and a small orange accent are visible, nestled securely within its packaging. The camera slowly moves to show more of the printer emerging from the box, indicating the process of removing it. The lighting is soft and diffuse, illuminating the interior of the box and the printer. The brown cardboard of the packaging frames the shot, emphasizing the unboxing experience. The shot conveys a sense of anticipation and the solid, protected nature of the product within its shipping container.
2:21phone monitoring printer live A medium shot displays the 3D printer on a dark surface, with its internal orange rocket engine model illuminated. In the foreground, a hand holds a modern smartphone, which shows a live video feed from the printer's internal camera. The phone screen displays a user interface (UI) with settings and a small live preview of the printing model. The text 'Night mode' is overlaid on the video frame, indicating a feature. The background is dark, emphasizing the printer and the monitoring device. The lighting is focused, highlighting the screen and the printer. This shot demonstrates the remote monitoring capabilities and smart features of the printer.
2:25screen recording night mode A screen recording shows the smartphone display, zoomed in on the live camera feed from the 3D printer's interior in 'Night mode.' The image on the phone screen is dark and monochromatic, possibly using infrared vision, showing the orange rocket engine model clearly against a black background. The 'Night mode' text is still overlaid, confirming the feature. The UI elements of the phone's camera app are visible around the feed, including settings toggles and numerical data. This shot highlights the printer's advanced monitoring capabilities, particularly its ability to observe prints even in low-light conditions, and its integration with mobile technology.
2:26printer printing white object An overhead shot looks down into the 3D printer's interior, showing the print head actively printing a complex, geometric white object on the print bed. The object has various angular shapes and internal supports, demonstrating intricate detail. The print head moves precisely, layering filament. The internal LED lighting illuminates the white print and the surrounding dark interior of the printer. The camera follows the print head's movement slightly, providing a dynamic view of the ongoing printing process. This shot highlights the printer's capability for fine detail and complex geometries, emphasizing the quality of its output.
2:29prusa core one l webpage components A screen recording displays a webpage titled 'Main components' from the Prusa Academy online course. The page features a detailed diagram of the PRUSA CORE ONE L 3D printer with numbered labels pointing to various parts (1, 2, 4, 7, 11, 14). The printer in the diagram contains the orange rocket engine model. The background of the webpage is white, with clear black text and illustrations. The shot highlights the comprehensive educational resources available, making it easier for users to understand the printer's structure and functionality. The graphical representation emphasizes the user-friendly approach to learning about the product.
2:34prusa core one l webpage camera A screen recording displays another section of the Prusa Academy webpage, this time focusing on the 'Buddy3D camera.' The text describes the camera's features, including high-quality optics, IR illumination for night mode, and USB-C connectivity. An image below the text shows a close-up of the printer's internal camera, providing a visual reference. The webpage's white background and clear black text maintain a professional and informative tone. The shot emphasizes the printer's advanced monitoring capabilities and the detailed support documentation available, ensuring users can fully leverage its features, including remote monitoring and time-lapse video creation.
2:40prusa core one l webpage app A screen recording showcases a sequence of three smartphone screens, demonstrating the PRUSA CORE ONE L printer's mobile application. The screens show different stages of the app's interface: 'Overview' with printer status (temperature, status, progress), 'Queue' for managing print jobs, and 'Camera Setup Wizard' for integrating a camera. A stylized camera icon with a hand pointer indicates user interaction. The app's clean design and intuitive layout are visible. This shot highlights the remote control and monitoring aspects of the printer, emphasizing user convenience and smart integration. The white background of the webpage behind the app screens maintains a clean aesthetic.
2:45josef prusa summary 1 A medium close-up of Josef Prusa, speaking directly to the camera against a plain black background. He smiles confidently, using open hand gestures to reiterate the key benefits of the printer. He wears a black t-shirt under a black blazer. The lighting is soft and frontal, illuminating his face and upper body. The static camera maintains a direct connection with the viewer. His tone is enthusiastic and assuring, summarizing the product's advantages in a concise manner. The minimalist background focuses all attention on the speaker and his concluding remarks, reinforcing the brand's message.
2:48josef prusa summary 2 A medium close-up of Josef Prusa, continuing his address to the camera against a plain black background. His facial expression is serious yet reassuring, as he details further advantages of the printer. He uses precise hand gestures to underscore technical points. He wears a black t-shirt under a black blazer. The lighting remains soft and frontal, ensuring his features are well-defined. The static camera provides a steady platform for his message, maintaining a professional and informative tone. The dark, uncluttered background ensures the viewer's focus remains solely on the speaker and his concluding summary of the product's advanced features.
2:50printer head fast motion A very close-up, fast-moving shot of the 3D printer's print head. The camera is slightly blurred due to the speed and shallow depth of field, emphasizing the rapid motion of the print head as it moves across the print bed. The 'PRUSA CORE ONE L' logo is visible on the print head, though somewhat indistinct due to the motion blur. The background is a dark, indistinct blur of the printer's interior. The lighting is functional, highlighting the mechanical action. This quick cut and blurred motion creates a sense of speed and efficiency, conveying the high-performance capabilities of the printer.
2:52josef prusa final summary A medium close-up of Josef Prusa, delivering his final summary to the camera against a plain black background. He maintains a confident and enthusiastic expression, using open hand gestures to reinforce the overall message of the product's innovation and benefits. He wears a black t-shirt under a black blazer, consistent with his earlier appearances. The lighting is soft and frontal, ensuring clarity and focus. The static camera provides a stable closing shot for his presentation, leaving a strong impression of the product and its creator. The minimalist background allows the focus to remain entirely on the speaker and the concluding brand message.